The Status section provides a detailed, informational overview of various system components and configurations. Note that all settings affecting these status entries are located in their respective sections of the WebUI.

Depending on whether the Virtual Ethernet-WiFi Bridge is enabled or disabled, the appearance of the status page will vary:

When the Virtual Ethernet-WiFi Bridge is enabled , the status page will look like this:

When the Virtual Ethernet-WiFi Bridge is disabled , the status page will look like this:

This section displays the current status of the device’s firmware.

Displays the current firmware version installed on the device (e.g., `1.5.1`).

Shows the timestamp of the last firmware update.

Displays the current local time configured on the device.

This section provides details about the device’s connection to the data logging platform.

Indicates whether a connection to the data platform is established:

Specifies which network interface is currently being used for data platform communication:

Displays information regarding the device’s cellular connection.

Shows whether the cellular connection is enabled and active:

Displays the name of the cellular profile that is currently in use.

The WAN IP address assigned to the device, along with the subnet mask.

Shows the gateway IP address.

Reflects the strength of the cellular connection signal:

Displays the status and details of the Virtual Ethernet-WiFi bridging feature, which is used to link Ethernet and WiFi networks.

Shows whether the `Virtual Ethernet-WiFi Bridge` is enabled:

Displays the Service Set Identifier of the connected wireless network.

The LAN IP address and subnet mask, typically displayed in CIDR notation (e.g., 192.168.82.1/24 ).

The IP address of the default gateway configured for the bridged connection.

Indicates whether the bridge is connected:

Displays the status of the device’s Ethernet connection.

Shows whether the Ethernet interface is enabled:

Displays the name of the profile currently managing the Ethernet connection.

The LAN IP address assigned to the device, along with the subnet mask in CIDR notation (e.g., 192.168.82.1/24 ).

The IP address of the default gateway for the Ethernet interface.

Shows whether the Ethernet connection is:

This section provides detailed information about the device's WiFi connection status.

Indicates whether WiFi is enabled:

Shows the profile currently managing the WiFi connection.

The Service Set Identifier of the wireless network in use.

Displays the WiFi mode set by the connection profile (e.g., Access Point, Client ).

Shows the gateway IP address for the WiFi interface.

The LAN IP address assigned to the WiFi interface, along with the subnet mask (e.g., 192.168.82.1/24 ).

This section displays the status of the GateManager service, which facilitates secure, real-time connections to remote devices.

Displays the current connection status ( Connected or Disconnected ) and shows the URL of the GateManager service.

This section displays the connection status of the device's remoteConnect service. This service provides secure remote access to the device over the ifm cloud infrastructure.

Shows whether the device is currently connected to a relay server.
🟢 Connected to relay server indicates an active remote session via the cloud relay service.

Indicates the geographical region of the relay server the device is connected to. This helps identify which data center is facilitating the connection (e.g., Europe).

Displays the type of remoteConnect connection. The value Relay server means that the connection is routed through a cloud-based relay, typically used when direct peer-to-peer connectivity is not possible due to firewall or NAT restrictions.

The Status overview provides a centralized way to monitor the health and activity of key components in the CR3171 device. While the information displayed in this section is read-only, corresponding configuration options are located in their respective sections throughout the WebUI.

For further assistance or troubleshooting, consult the relevant sections of this guide or contact technical support.